Table of Contents
Advertisement
KINO-DQM871-i1 Mini-ITX SBC
power supply unit, the cooling fan of a power supply can also help generate airflow
through the board surface.
4.8.2 Motherboard Installation
To install the KINO-DQM871-i1 motherboard into the chassis please refer to the reference
material that came with the chassis.
4.9 Internal Peripheral Device Connections
This section outlines the installation of peripheral devices to the onboard connectors.
4.9.1 SATA Drive Connection
The KINO-DQM871-i1 is shipped with two SATA drive cable. To connect the SATA drive
to the connector, please follow the steps below.
Step 1:
Locate the SATA connector and the SATA power connector. The locations of
the connectors are shown in Chapter 3.
Step 2:
Insert the cable connector. Insert the cable connector into the on-board SATA
drive connector and the SATA power connector. See Figure 4-12.
Figure 4-12: SATA Drive Cable Connection
Page 73
Advertisement
Table of Contents
