Figure 5-4: Installing A Dimm - IEI Technology SPCIE-3600AM2 User Manual

Figure 5-4: Installing a DIMM

Step 1: Open the DIMM socket handles. The DIMM socket has two handles that secure
the DIMM into the socket. Before the DIMM can be inserted into the socket, the
handles must be opened. See Figure 5-4.
Step 2: Align the DIMM with the socket. The DIMM must be oriented in such a way that
the notch in the middle of the DIMM must be aligned with the plastic bridge in the
socket. See Figure 5-4.
Step 3: Insert the DIMM. Once properly aligned, the DIMM can be inserted into the
socket. As the DIMM is inserted, the white handles on the side of the socket will
close automatically and secure the DIMM to the socket. See Figure 5-4.
Step 4: Removing a DIMM. To remove a DIMM, push both handles outward. The
memory module is ejected by a mechanism in the
Page 74
SPCIE-3600AM2 PICMG 1.3 CPU Card
socket.Step 0: