Features And Benefits; Setting Up The Raid - IEI Technology SPCIE-3600AM2 User Manual

SPCIE-3600AM2 PICMG 1.3 CPU Card
CAUTION:
Do not accidentally disconnect the SATA drive cables. Carefully route
the cables within the chassis to avoid system down time.

7.3 Features and Benefits

Supports RAID levels 0, 1, 10, RAID 5 and JBOD
Supports connectivity to two or more disk drives
Windows-based software for RAID management

7.4 Setting up the RAID

To install the RAID controller using Windows or a later OS, please follow the steps below.
Step 1: Connect SATA drives to the system. Connect at least two SATA drives to the
system. Make sure the drives have the same capacity, are the same type and
have the same speed.
NOTE:
Make sure the SATA drives are EXACTLY the same when they are
configured in a RAID configuration (JBOD, RAID 0 or RAID 1). If they
are not the same size, disk drive capacity is sacrificed and overall
performance affected.
Step 2: Turn on the system and access the BIOS.
Step 3: Access the Advanced menu option (Section 6.3).
Step 4: Access the IDE Configuration sub-menu (Section 6.3.2)
Step 5: Select the nVidia RAID Setup option.
Page 141