Keyboard And Mouse Ps/2 Cable With Bracket - IEI Technology SPCIE-3600AM2 User Manual

SPCIE-3600AM2 PICMG 1.3 CPU Card
connector. Pin 1 on the audio kit connector is indicated with a white dot. See
Figure 5-7.
Step 3: Figure 5-7: Audio Kit Connection
Step 4: Connect the audio devices. Connect the speakers and the subwoofer to the
appropriate audio jack shown in Figure

5.7.4 Keyboard and Mouse PS/2 Cable with Bracket

The SPCIE-3600AM2 can be shipped with an optional keyboard and mouse PS/2 cable
with bracket. The keyboard and mouse PS/2 cable with bracket comprises of two PS/2
connectors installed on a bracket. Each PS/2 connector is connected via a cable to two
separate female 5-pin wafer connectors. The female 5-pin wafer connectors are
connected to the corresponding on-board keyboard and mouse connector. To connect the
optional keyboard and mouse PS/2 cable with bracket please follow the steps below.
Step 1: Locate the connectors. The locations of the keyboard connector and the mouse
connector are shown in Chapter 3.
Step 2: Align the connectors. Correctly align pin 1 on the PS/2 keyboard (mouse) cable
5-7.Step 0:
Page 81