Internal Peripheral Device Connections; Sata Drive Connection; Figure 4-4: Com 6 Function Select Jumper Location - IEI Technology KINO-PV-D5253-D4253 User Manual

Figure 4-4: COM 6 Function Select Jumper Location

4.5 Internal P eripheral Devic e C onnec tions
This section outlines the installation of peripheral devices to the onboard connectors.
4.5.1 S ATA Drive C onnec tion
The KINO-PV-D5253/D4253 is shipped with one SATA drive cables. To connect the SATA
drives to the connectors, please follow the steps below.
Locate the connectors. The locations of the SATA drive connectors are shown in
Chapter 3.
Insert the cable connector. Press the clip on the connector at the end of the SATA cable
and insert the cable connector into the on-board SATA drive connector. See
Figure 4-5
P age 44
K INO-P V-D5253-D4253 Mini-IT X Motherboard