Installation Checklist - IEI Technology SPCIE-3600AM2 User Manual

o
When working with the SPCIE-3600AM2, make sure that it is
disconnected from all power supplies and that no electricity is being fed
into the system.
Before and during the installation of the SPCIE-3600AM2 DO NOT:
Remove any of the stickers on the PCB board. These stickers are required for
warranty validation.
Use the product before verifying all the cables and power connectors are
properly connected.
Allow screws to come in contact with the PCB circuit, connector pins, or its
components.

5.2.2 Installation Checklist

The following checklist is provided to ensure the SPCIE-3600AM2 is properly installed.
All the items in the packing list are present
The CPU is installed
The CPU cooling kit is properly installed
A compatible memory module is properly inserted into the slot
The jumpers have been properly configured
The SPCIE-3600AM2 is inserted into a chassis with adequate ventilation
The correct power supply is being used
The following devices are properly connected
o
Primary and secondary IDE device
o
SATA drives
o
Keyboard and mouse cable
o
Audio kit
o
Power supply
o
USB cable
o
Serial port cable
The following external peripheral devices are properly connected to the
chassis:
o
VGA screen
o
LAN
Page 68
SPCIE-3600AM2 PICMG 1.3 CPU Card