Getting Help; Unable To Reboot After Configuration Changes; Bios Menu Bar - IEI Technology SPCIE-3600AM2 User Manual

SPCIE-3600AM2 PICMG 1.3 CPU Card
F1 key General help, only for Status Page Setup Menu and Option
Page Setup Menu
F2 /F3 key Change color from total 16 colors. F2 to select color
forward.
F10 key Save all the CMOS changes, only for Main Menu
Table 6-1: BIOS Navigation Keys

6.1.3 Getting Help

When F1 is pressed a small help window describing the appropriate keys to use and the
possible selections for the highlighted item appears. To exit the Help Window press E
the F1 key again.

6.1.4 Unable to Reboot After Configuration Changes

If the computer cannot boot after changes to the system configuration is made, CMOS
defaults. Use the jumper described in Chapter 5.

6.1.5 BIOS Menu Bar

The menu bar on top of the BIOS screen has the following main items:
Main
Changes the basic system configuration.
Advanced
PCIPnP
Boot
Changes the system boot configuration.
Security
Chipset
Power
Exit
Selects exit options and loads default settings
The following sections completely describe the configuration options found in the menu
items at the top of the BIOS screen and listed above.
Changes the advanced system settings.
Changes the advanced PCI/PnP Settings
Sets User and Supervisor Passwords.
Changes the chipset settings.
Changes power management settings.
or
SC
Page 95