Table 5-2: Clear Cmos Jumper Settings - IEI Technology SPCIE-3600AM2 User Manual

jumper cap to close pins 2 and 3 for a few seconds then reinstall the jumper clip back to
pins 1 and 2.
If the "CMOS Settings Wrong" message is displayed during the boot up process, the fault
may be corrected by pressing the F1 to enter the CMOS Setup menu. Do one of the
following:
Enter the correct CMOS setting
Load Optimal Defaults
Load Failsafe Defaults.
After having done one of the above, save the changes and exit the CMOS Setup menu.
The clear CMOS jumper settings are shown in Table 5-2.
Jumper Select
Short 1 - 2
Short 2 - 3

Table 5-2: Clear CMOS Jumper Settings

The location of the clear CMOS jumper is shown in Figure 5-5 below.
Page 76
SPCIE-3600AM2 PICMG 1.3 CPU Card
Description
Keep CMOS Setup Default
Clear CMOS Setup