Pci/Pnp - IEI Technology SPCIE-3600AM2 User Manual

SPCIE-3600AM2 PICMG 1.3 CPU Card
Legacy USB Support [Enabled]
Use the Legacy USB Support BIOS option to enable USB mouse and USB keyboard
support.
Normally if this option is not enabled, any attached USB mouse or USB keyboard does not
become available until a USB compatible operating system is fully booted with all USB
drivers loaded. When this option is enabled, any attached USB mouse or USB keyboard
can control the system even when there is no USB driver loaded onto the system.
Disabled
Enabled
Auto
USB2.0 Controller Mode [HiSpeed]
Use the USB2.0 Controller Mode option to set the speed of the USB2.0 controller.
FullSpeed
HiSpeed

6.4 PCI/PnP

Use the PCI/PnP menu (BIOS Menu 15) to configure advanced PCI and PnP settings.
WARNING:
Setting wrong values for the BIOS selections in the PCIPnP BIOS
menu may cause the system to malfunction.
Legacy USB support disabled
D Legacy USB support enabled
EFAULT
Legacy USB support disabled if no USB devices are
connected
The controller is capable of operating at 12Mb/s
D The controller is capable of operating at 480Mb/s
EFAULT
Page 125