TOHATSU MFS 8B Service Manual page 77

5. Put rod joint on shift arm
of remote control cable with rod joint.
When adjusting position of cable joint, push in
remote control cable by the amount of the play.
6. Screw on cable joint
nut.
7. Reconnect remote control cable joint attach washer, snap
pin and tighten lock nut.
8. Check if gear shifts smoothly, and repeat steps 2. to 7. as
necessary.
1. Start engine and run for 5 minutes to warm up.
2. Attach tachometer to high tension cord
speed.
More accurate and stable reading can be
obtained when tachometer lead is connected
with high tension cords of individual cylinders
linked with each other.
Tachometer :
P/N. 3AC-99010-0
Idle Speed :
950 r/min - In neutral
4st 8/9.8 2016
, and align position of nut
to position of remote control cable
to check idle
3-27