2.
Loosen flywheel nut.
Flywheel puller kit :
P/N. 3V1-72210-0
3.
Remove flywheel and key.
Flywheel puller kit :
P/N. 3V1-72210-0
Screw puller onto crankshaft end until flywheel is
disengaged from tapered section of crankshaft.
4.
Disconnect alternator, exciter coil and pulsar coil lead wires.
5.
Remove bolts of alternator
and then, alternator and exciter coil.
6.
Remove screws (2) of pulser coil
5-20
and exciter coil
(2 each),
, and then, pulser coil.
4st 8/9.8 2016