TOHATSU MFS 8B Service Manual page 184

Perform shim adjustment when ball bearing,
gear, drive shaft, propeller shaft or gear case is
replaced.
1. Install needle bearing
Needle Bearing Press Ass'y :
P/N. 3AC-72900-1
Bearing Outer Press Guide
Needle Bearing Press Rod
Needle Bearing Press
O ring
Needle Bearing Press Guide
Needle Bearing Press Bolt
Bolt M8-110
Collar
Washer
Needle Bearing Press Flange
• Before installing needle bearing, be sure to
clean bearing installation face and apply gear
oil.
• Do not reuse needle bearing. Use new item.
Push In Depth
189.75 ±0.3 mm (7.4705±0.0118 in)
6-18
by using the following tools.
:
:
:
:
:
:
:
:
:
:
(Reference) :
Needle bearing
Do not reuse.
4st 8/9.8 2016