TOHATSU MFS 8B Service Manual page 175

• Removal of lower unit does not require removal of
power unit from outboard motor body.
• When removing lower unit from outboard
motor, tilting the outboard motor makes the
work easier.
1. Remove spring pin and disconnect shift rod.
• Disconnect shift rod at lower side of shift rod joint
• Use spring pin tool A
• Do not reuse removed spring pin.
• To hold lower unit, keep spring pin tool inserted
until the step of removal of lower unit.
Spring pin tool A
P/N. 345-72227-0
2. Remove lower unit installation bolts, and pull lower unit ass'y
downward to remove.
1. Remove pump case (Upper)
2. Remove impeller .
4st 8/9.8 2016
.
to remove spring pin.
(ø3.0) :
.
6-9