TOHATSU MFS 8B Service Manual page 212

1. Insert drive shaft housing ass'y into stud bolt
rubber mount of swivel bracket
Align dumper bolt holes accurately.
2. Install rubber mount and lower damper and mount bracket to
drive shaft housing. Tighten bolts
torque.
Steering Bracket Installing Nut
M8 13N · m (9 lb · ft) [1.3 kgf · m]
Lower Rubber Mount Bolt
M6 6N · m (4 lb · ft) [0.6 kgf · m]
· When installing lower rubber mount, be
careful that ground lead is not caught by the
part.
· When installing steering shaft, watch spigot
joint for installation on the mount bracket.
· Tighten lower rubber mount bolts in several
steps to 6N · m.
7-18
of upper
.
and nuts to specified
:
:
4st 8/9.8 2016