1.
Remove belt cover
outer surfaces for cracks, damages and wear while rotating
flywheel clockwise with hands. Replace if necessary.
Elongation limit
Press belt at the center, and replace if deflected
over 10mm.
1.
Remove recoil starter and belt cover.
2.
Loosen flywheel nut.
Flywheel Puller Kit :
P/N. 3V1-72210-0
3.
Use flywheel puller bolt to remove flywheel and then key.
Flywheel Puller Kit :
P/N. 3V1-72210-0
Screw puller onto crankshaft end until flywheel is
disengaged from tapered section of crankshaft.
4st 8/9.8 2016
, and then check timing belt inner and
:
3-11