TOHATSU MFS 8B Service Manual page 235

）
1. Attach circuit breaker
2. Attach circuit breaker holder securely by using screws.
3. Attach blue wire to terminal post of circuit breaker
4. Place green wire along bore of bracket.
5. Attach brush holder
6. Attach green wire and brush wire end to motor bracket
securely by using screw
7. Attach 2 springs in the brush.
8. Attach circuit breaker
9. Attach armature while holding brush
groove during installation of armature
.
10. Attach O ring to motor bracket
4st 8/9.8 2016
to motor bracket .
by using screw .
.
and brush in the groove.
located in the
to motor bracket
.
.
Wire (blue)
Wire (green)
Screw
Brush holder
Brush
Armature
Motor bracket
Brush
Brush
O ring
Spring
Circuit breaker
Motor bracket
O ring
7-41