4.
Attach pump case liner
apply grease to interior of pump case liner
Bring pump case liner projection
case (upper) groove
5.
Install pump case (upper) ass'y
tighten bolts
in two or three steps to specified torque.
Apply grease to interior of pump case liner, and
install pump case (upper) by pushing it down
with hand while turning drive shaft clockwise.
Pump Case (Upper) Bolt
6 N · m (4 lb · ft) [0.6 kgf · m]
6.
Install cam rod ass'y
Cam Rod Bushing Bolt :
6 N · m (4 lb · ft) [0.6 kgf · m]
Be careful of direction of cam rod.
4st 8/9.8 2016
to pump case (upper)
.
to pump
.
on the gear case, and
:
as shown.
, and
6-25