TOHATSU MFS 8B Service Manual page 213

3. Attach ground wire .
· Be careful not to paint earth wire attaching
surface, or the anti-corrosion effect will be
disabled.
· If there are two ground wires, split them 90
degrees as illustrated.
1. Remove drive shaft housing by referring to "Chapter 7
Removing Drive Shaft Housing".
2. Loose co-pilot handle nut and remove handle
3. Pull out steering shaft
remove.
· Loosen friction bolt.
· Remove washer, and then, O ring and collar
from steering bracket.
· When lifting steering shaft, be careful not to
lose friction piece.
4. Check individual parts.
4st 8/9.8 2016
.
from swivel bracket ass'y to
7-19