TOHATSU MFS 8B Service Manual page 64

10. Check that "▲" mark
of cylinder head are alighened with each other.
# 1 p i s t o n i s t o b e a t t o p d e a d c e n t e r o f
compression stroke.
11. Face part number side up of new timing belt
belt with timing pulley and then with cam shaft pulley.
12. Turn timing pulley
belt conform to the pulley, and then, check that crankshaft
turns smoothly, and the marks
pulleys and are aligned with each other respectively.
13. Put belt guide , and secure it with nut
the nut temporarily.
3-14
of timing pulley and "▲" mark
, and engage
two times clockwise to make timing
and , and
by tightening
and , of
4st 8/9.8 2016