TOHATSU MFS 8B Service Manual page 239

6. Attach cleaned screen
7. Attach pump coupling
8. Install motor ass'y to power tilt pump and cylinder ass'y.
9. Attach wireharness mounting screws.
10. Install motor ass'y
by using screws
torque.
Motor ass'y installation screws:
5N ･ m (4lb ･ ft) [0.5kgf ･ m]
11. Fill power trim system with power trim fluid.
Recommended PT Fluid :
ATF DEXRON II
Extend trim rod and put PT unit vertically. Pour
fluid until it overflows from inlet.
12. Attach the cap .
4st 8/9.8 2016
.
to pump.
to cylinder ass'y and power tilt pump
, and tighten screws to specified
Pump filter
Pump/motor coupler
7-45