TOHATSU MFS 8B Service Manual page 238

）
1. Coat new O rings (2)
housing.
2. Coat new O ring
3. Attach filter and orifice
4. Attach up side relief valve
Recommended PT Fluid :
ATF DEXRON II
5. Secure pump with screws
Tighten screws to specified torque.
Pump mounting screw :
5N ･ m (4lb ･ ft) [0.5kgf ･ m]
7-44
with oil, and attach it to power tilt
with oil, and attach it to orifice
.
to power tilt pump housing.
, .
.
Up relief valve ass'y
O ring
Valve seat
Ball
Spring guide
Spring
Power tilt pump
Internal hex screw (5mm×20)
Internal hex screw (5mm×25)
Down orifice ass'y
Filter
O ring
orifice
O ring
4st 8/9.8 2016