5.
Remove cam pulley and cylinder head cover. Remove hose.
For the procedure, refer to "Removing Timing
Belt and Pulley" in Chapter 5.
6.
Remove cylinder head bolts in the reverse sequence of
order shown, and remove cylinder head.
7.
Loosen rocker arm lock nut
as much as possible.
8.
Remove oil pump ass'y
9.
Remove rocker arm
shaft
.
· Push in flat head driver with rag and pull the
part out downward slowly.
· Pull the shaft while holding other parts with a
hand.
10.
Remove cam shaft
11.
Remove oil seal
.
5-26
, and loosen adjusting screw
.
, spring
, washer
and rocker arm
.
5
2
9
3
1
6
4
8
7
4st 8/9.8 2016