TOHATSU MFS 8B Service Manual page 71

3. Put throttle cable
upper recess of throttle drum, and secure temporarily
with nut.
Locate the part at the center of threaded section.
4. Set throttle grip to full close position.
5. Like step 3, put other throttle cable
of throttle drum, and secure temporarily with nut.
Locate the part at the center of threaded section.
6. Adjust both throttle wires so that throttle drum arm
touches stopper
throttle.
7. Attach throttle rod .
4st 8/9.8 2016
with more projection of inner into
into lower recess
of throttle wire bracket at full open
3-21