TOHATSU MFS 8B Service Manual page 216

1. Reassemble components of swivel bracket
2. Install clamp bracket
bracket shaft , and then, tighten nylon nut
their specified torque respectively.
Nylon Nut
25 N · m (18 lb · ft) [2.5 kgf · m]
Bolt :
6.0 N · m (4 lb · ft) [0.6 kgf · m]
3. Put grease into bushing
overflows.
7-22
, and then, insert distance piece
to swivel bracket , insert swivel
:
through grease nipple
and nut to
until it
into clamp brackets .
4st 8/9.8 2016