TOHATSU MFS 8B Service Manual page 128

6. Tighten cam shaft pulley
Tighten bolt while holding crank shaft with crank
shaft holder to fix timing belt.
Cam Shaft Pulley Bolt
11 N · m (8 lb · ft) [1.1 kgf · m]
7. Put belt guide , and secure it with nut
nut temporarily.
8. Tighten timing pulley nut to specified torque.
· Put pulley nut with chamfered face down.
· Use 32mm socket wrench
spanner wrench for this step.
Crankshaft holder
P/N. 3V1-72815-0
Timing Pulley Nut :
50 N · m (36 lb · ft) [5.0 kgf · m]
5-24
to specified torque.
:
by tightening the
and 30mm
:
Crankshaft holder
Deep socket 32mm
Magneto key
Crankshaft holder
Pulley nut
4st 8/9.8 2016