8.
Set throttle grip to full open position, and secure throttle
rod
with screw
open stopper
.
9.
Set throttle grip to full close position, and check if
carburetor link
touches full close stopper
10.
Repeat above steps 8. and 9. several times to check if
carburetor link touches full close stopper.
1.
Loosen throttle link rod stop screw
2.
Remove bolt of remote control stay cover
3.
Run remote control cable
Applying small amount of grease to grommet
makes this work easier.
3-22
with carburetor link
touching full
.
.
and bolt.
(throttle side) through grommet.
4st 8/9.8 2016