TOHATSU MFS 8B Service Manual page 57

1. Tilt down outboard motor to make it vertical.
2. Remove upper oil plug
gear case.
Spill of some oil from plug hole
removed indicates that gear case is filled with
specified quantity of gear oil.
3. Add recommended gear oil to specified level if it is lacking.
Gear Oil : 320cm
Hypoid Gear Oil
API : GL-4, GL-5
SAE : #80W-90, #90
If the oil is lacking much, add through lower oil
plug hole.
4. Attach upper oil plug
Inspection of water pump does not require
removal of power unit from outboard motor body.
1. Remove spring pin and disconnect shift rod.
(Disconnect shift rod at lower side of shift rod joint
· Disconnect shift rod at lower side of shift rod
joint .
· Use spring pin tool to remove spring pin.
· Do not reuse removed spring pin.
Spring Pin Tool A
P/N. 345-72227-0
4st 8/9.8 2016
and check level of gear oil in the
as plug is
3 (10.8fl.oz)
.
(ø3.0) :
.)
3-7