14.
Check that shifting control lever forward (F)
approximately 32 degrees, where it is stopped once,
makes the gear engage, and then, fully shifting the lever
makes throttle valve fully open Then, check that shifting
the lever reverse (R)
where it is stopped once, makes the gear engage, and
fully shifting the lever makes throttle valve fully open.
15.
Check if throttle valve operates smoothly, and repeat
steps 1. to 15. as necessary.
16.
Reconnect connector
and single connectors
17.
Run cord ass'y
into grommet.
18.
Fit grommet into bottom cowl, and fix remote control
cables by fitting the grooves on the cable clip.
4st 8/9.8 2016
by approximately 32 degrees,
(EPT model only) of cord ass'y
.
by
3-25