TOHATSU MFS 8B Service Manual page 259

3. Apply pressure slowly with vacuum/pressure gauge.
4. Check that oil pressure switch is not conductive with
specified pressure applied. Replace if conductive.
Specified Pressure :
0.020 - 0.029 MPa 2.8 - 4.0 psi) [0.2 - 0.3 kgf/cm
5. Reinstall the part.
Oil Pressure Switch :
8 N · m (6 lb · ft) [0.8 kgf · m]
This test can be made without removing parts.
1. Check electrical conductivity of neutral switch. Replace if no
conductivity.
Switch Position
Released
Pushed
1. Check conduction of stop switch, and replace if not
conductive.
This test can be made without removing parts.
Switch Position
Released : OFF
Pushed : ON
4st 8/9.8 2016
]
2
Lead Wire Color
Green (G) Green (G)
Lead Wire Color
Green (G) Red (R)
8-15