TOHATSU MFS 8B Service Manual page 177

1. Remove spring pin
from cam rod .
• Use spring pin tool A to remove spring pin.
• Do not reuse removed spring pin.
Spring Pin Tool A (ø3.0) :
P/N. 345-72227-0
1. Check cam rod and clutch cam
Replace if necessary.
1. Reassemble.
Be careful of direction of cam rod.
• Use spring pin tool B to install spring pin.
• Do not reuse removed spring pin.
Spring Pin Tool B (ø3.0) :
P/N. 345-72228-0
1. Remove pump case (lower).
1. Use bladed screw driver to remove oil seal
4st 8/9.8 2016
, clutch cam and cam rod bushing
for crack and wear.
.
Oil seal
Do not reuse.
6-11