TOHATSU MFS 8B Service Manual page 211

1. Install water pipe into drive shaft housing.
2. Put new gasket, and then, attach idle exhaust cover
securing bolts and tighten them in the order of their
numbers shown to specified torque.
Idle Exhaust Installation Bolt :
6 N · m (4 lb · ft) [0.6 kgf · m]
3. Put upper mount and damper
and tighten bolts .
Install damper in direction as illustrated
Mount Rubber (upper) Installation Bolts:
9N · m (7 lb · ft) [0.9 kgf · m]
4st 8/9.8 2016
on drive shaft housing,
.
7-17