TOHATSU MFS 8B Service Manual page 193

1. Attach lower unit ass'y to drive shaft housing, and tighten
lower unit installation bolts (nuts)
Gear Case Installation Bolt (Nut)
11.5 N · m (8.5 lb · ft) [1.2 kgf · m]
2. Set both engine side and gear case side gear shifts to
neutral (N).
3. Connect shift rod and cam rod with new spring pin.
Spring Pin Tool B (ø3.0)
P/N. 345-72228-0
4st 8/9.8 2016
to specified torque.
:
:
"UL" Transom Model
A
6-27