TOHATSU MFS 8B Service Manual page 242

7. Put washer and bolt
the bolt to specified torque.
Retaining Bolt
13N ･ m (9.4lb ･ ft) [1.3kgf ･ m]
8. Attach bushings (2)
9. Extend power tilt cylinder rod to align tilt cylinder rod and
swivel bracket.
10. Fit tilt cylinder rod by using cylinder pin (upper).
11. Tighten tilt cylinder pin (upper) mounting bolt
torque.
Tilt cylinder pin (upper) mounting bolt :
13N ･ m (9.4lb ･ ft) [1.2kgf ･ m]
12. Secure ground cord
7-48
on the pin (lower) and tighten
:
to swivel bracket .
to specified
by using bolt.
Clamp bracket
Swivel bracket
Bushings (2)
4st 8/9.8 2016