TOHATSU MFS 8B Service Manual page 185

2. Use the following tools to install taper roller bearing outer
race.
Bearing Outer Press Kit :
P/N. 3B7-72739-1
Bearing Outer Press Plate
Bearing Outer Press Guide
Bearing Outer Press Rod
3. Fix gear case on the vice with its propeller shaft opening
facing upward.
4. Clean outer race installation face in the gear case and apply
gear oil.
5. Apply gear oil to external face of outer race, and put the
outer race in the center of the housing with the marked face
of the race facing in the housing.
6. Use press to press fit ball bearing fully into housing.
4st 8/9.8 2016
:
:
:
6-19