Monitoring The Device - Kaco blueplanet 92.0 TL3 US Manual

Manual
Country- Level Display/
spec. Set- settings
tings
Service Log
3
1 2 4 4
Export Service Package
3
1 2 4 4
Network Statistics
3
1 2 4 4
Remote Access
3 4
1 2 4
History
2
1 3 4 4
Account Management
2
1 3 4 4
Restart the Device
2
1 3 4 4
NOTE
With regard to the selection of country settings, KACO new energy attests:
1. that the relevant certificates are only valid if the corresponding country settings have been selected.
2. that all configured grid parameters must be configured in accordance with the requirements of the grid op-
erators.
3. that the configuration of parameters using IEEE 1547: 2003 table 1 is possible but is only permitted if it is
requested by the grid operators.
NOTE
Setting values according to pictogram
please note the slider in the web interface.
9.5

Monitoring the device

↻ You have connected the device to the network.
1. When using a DHCP server: Activate DHCP.
2. For manual configuration (DHCP off):
3. Open the Settings/Network menu.
4. Assign a unique IP address.
5. Assign a subnet mask.
6. Assign a gateway.
7. Assign DNS server.
KACO blueplanet 92.0 TL3 US KACO blueplanet 110 TL3 US KACO blueplanet 125 TL3 US
Configuration and operation | 9
Action in this menu/meaning
NOTE: Display of all logged installations. You should also add
all maintenance activities manually via the "Service" and "In-
staller" interface.
1. Enter additional service activities (exception: "user" interface)
2. Export service logs, if necessary.
NOTE: Possibility to send an error log to KACO new energy.
F Press Export button and send file to our service staff.
NOTE: Display of sent and received data packets
F Press Update.
When remote access is enabled, KACO can access the device remotely
and assist you.
F Activate on request.
NOTE: Displays all of the actions performed in the system and
on the web interface.
1. Enter your User name.
2. Enter your new user-defined Password.
NOTE: The following is specific to KACO: Following initial
start-up, it is necessary to Change password
NOTE: Transfer safety-related parameters to a storage
medium.
F If necessary, re-start the device.
refer only to the blueplanet 125TL3 device type. For your device
Page 75