Kaco blueplanet 92.0 TL3 US Manual page 54

Grid support interactive inverter
Table of Contents

Advertisement

9 | Configuration and operation
Country-
Level Display/
spec. Set-
settings
tings
Localization
2
4
1
3
4
Status
Miscellaneous
2
1
3
4
4
DC-Settings
1
2
3
4
4
String Combiner
2
1
3
4
4
String combiner moni-
toring
Deactivated | By in-
verter and segment
controller / SCADA sys-
tem | By Segment Con-
troller / SCADA System
Serial number of as-
signed string combiner
Baud rate & number of
data capture units
9600 8n1
Unit address
Unit channels
Constant voltage con-
1
2
3
4
4
trol
Constant voltage mode
Off | On
Constant voltage
/
[See sec-
tion 4} Page 15] [V] /
1 [V]
Page 54
Action in this menu/meaning
1. Select the current date and enter the time or press the button
„ Sync with client device now".
2. Select time zone.
3. Activate NTP server and assign name.
4. Obtain NTP server setting via DHCP.
5. Set temperature unit.
6. Confirm action field.
1. Enter the device name.
2. Enter the degree of longitude and latitude of the installation loca-
tion.
3. Enter the plant ID.
4. Confirm the action field.
Input masks for DC source (PV generator/battery)
NOTE: Opportunity to configure a string combiner.
F Activate monitoring function, if necessary.
F Enter the serial number once the device has been installed.
NOTE: The serial numbers of the string combiner that are not
connected directly to the device are entered on the segment
controller.
1. Specify the baud rate and capture interval.
2. If necessary, enter the number of the data capture unit.
1. Specify the IP address of the string combiner.
2. Specify the number of monitored strings.
3. Confirm the action field.
NOTE: Opportunity to deactivate the MPP seek mode in order
to operate the device with a constant DC voltage.
NOTE: With activated constant voltage control and "Q on De-
mand" function, energetic recovery may develop on the PV
generator. Please observe the module manufacturer's instruc-
tions and approval.
F Activate or deactivate the constant voltage controller.
1. Set value for constant voltage control.
2. Confirm the action field.
KACO blueplanet 92.0 TL3 US KACO blueplanet 110 TL3 US KACO blueplanet 125 TL3 US
Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Blueplanet 110 tl3 usBlueplanet 125 tl3 us

Table of Contents