Kaco blueplanet 92.0 TL3 US Manual page 63

Manual
Country- Level Display/
spec. Set- settings
tings
10 min. mean value
3
1 2 4 4
Overvoltage averag-
ing / country-depen-
dent [% Unom] /
%
Overvoltage protection
2
1 3 4 4
Transient overvoltage
1 2 3 4 4
protection
114.8 – 139.0 [%
Unom] /
tion 4} Page 15] /
0.1 %
Password protection
Status
Communication
1 4
2 3 4
Ethernet
2
4
1 3 4
IP Settings
3
1 2 4 4
DHCP
1 2 3 4 4
Status
IP Address
1 2 3 4 4
Subnet Mask
1 2 3 4 4
Default gateway
4
1 2 3 4
DNS server settings via
1 2 3 4 4
DHCP
Status
Primary DNS &
1 2 3 4 4
Secondary DNS (op-
tional)
Web Settings
1 2 3 4 4
HTTP Port
HTTPS Port
Modbus
3 4
1 2 4
Activation
4
1 2 3 4
Status
Write access
1 2 3 4 4
Status
KACO blueplanet 92.0 TL3 US KACO blueplanet 110 TL3 US KACO blueplanet 125 TL3 US
Configuration and operation | 9
Action in this menu/meaning
F Set the voltage in % using the mean value formation.
0,1
NOTE: Shutdown carried out within a grid cycle.
1. Shutdown carried out within a grid cycle.
2. Activate optional password protection.
3. Confirm action field.
[See sec-
Input screens for configuring the interfaces.
NOTE: Possibility to parameterise the Ethernet interface.
NOTE: Parameterization of network access.
F Activate or deactivate the DHCP.
On: Once the DHCP server becomes available, the IP address, subnet
mask, gateway and DNS server are automatically applied and the afore-
mentioned menu items are filled in.
Off: Apply settings manually.
F Allocate a unique IPv4 address in the network.
F Assign a subnet mask.
F Enter IPv4 address of the gateway.
F Activate or deactivate the DNS server from the DHCP.
On: Once the DHCP server becomes available, the IP address is automat-
ically applied and the aforementioned menu items are filled in.
Off: Apply settings manually.
1. Enter IPv4 address of DNS server.
2. Confirm the action field.
NOTE: Opportunity to set up the http ports.
F Set up the port at which the webserver can be reached.
1. Set up the safe port at which the webserver can be reached.
2. Confirm the action field.
NOTE: Option to set the Modbus port.
F Allow Modbus TCP read access.
F Allow Modbus TCP write access.
Enabling the write access allows system critical settings to be changed
over Modbus TCP. Really enable write access?
F Confirm the action field.
Page 63