Kaco blueplanet 92.0 TL3 US Manual page 64

Grid support interactive inverter
Table of Contents

Advertisement

9 | Configuration and operation
Country-
Level Display/
spec. Set-
settings
tings
Port
1
2
3
4
4
MQTT
3
1
2
4
4
Broker IP
1
2
3
4
4
Broker port
1
2
4
4
3
RS485
2
1
3
4
4
RS485 address
1
2
3
4
4
Power Limitation
2
1
3
4
4
Internal
3
1
2
4
4
Power Limitation
1
2
3
4
4
Status
Maximum apparent
1
2
4
4
3
power Slim
1000 -125000 /
[See sec-
tion 4} Page 15] [VA] /
100 [VA]
Maximum active power
1
2
4
4
3
Plim
1,0 – 100,0 [%
Slim] /
0.1
Password protection
Status
Page 64
Action in this menu/meaning
F Set up network port.
NOTE: The MQTT protocol is used to implement the advanced
functions between the Segment Controller and the inverter (in
particular, firmware updates, distribution of device configura-
tions etc.).
1. Displays the IP address transmitted by the Segment Controller.
. NOTE: The standard settings allow for successful commu-
nication with the Segment Controller.
2. Confirm the action field.
NOTE: Option to parameterise the RS485 interface. The pa-
rameters of the RS485 (CON901) are (as with all KACO invert-
ers): 9600 Baud, 8n1 and cannot currently be reconfigured via
the web interface
NOTE: The address must not be the same as that of any other
device or data logger.
F Assign a unique RS485 bus address to the device.
Bus termination is carried out on the HMI board by means of a dip-
switch.
F Confirm the action field.
NOTE: The output power of the device can be set permanently
to a lower value than the maximum output power by the in-
ternal power limitation. This may be necessary in order to
limit the maximum power rating of the plant at the grid con-
nection point, upon the grid operator's request.
NOTE: Opportunity to limit the power internally More detailed
information at: [See section 10.4.1} Page 96]
F Specify the activation status.
NOTE: The max. apparent power limits the internal power of
the device.
F Enter the value or set the value using the slider.
NOTE: Max. Active power limits the internal power of the unit
F Enter the value or set the value using the slider.
100[% Slim] /
KACO blueplanet 92.0 TL3 US KACO blueplanet 110 TL3 US KACO blueplanet 125 TL3 US
Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Blueplanet 110 tl3 usBlueplanet 125 tl3 us

Table of Contents