User Interface - Kaco blueplanet 92.0 TL3 US Manual

Manual
Operating status LED
Process is initiated (up-
date)
Procedure completed
successfully.
No fault
9.3

User interface

NOTE
Depending on the tolerances of the measuring elements, the measured and displayed values are not always
the actual values. However, the measuring elements ensure maximum solar yield. Due to these tolerances, the
daily yields shown on the display/screen may deviate from the values on the grid operator's feed-in meter by
up to 15%.
KACO blueplanet 92.0 TL3 US KACO blueplanet 110 TL3 US KACO blueplanet 125 TL3 US
Configuration and operation | 9
Symbol Description
The green "Operating" LED and the green "Feed-in" LED are flash-
ing quickly.
The green "Operating" LED and the green "Feed-in" LED are flash-
ing slowly and in tandem.
Note: Check the new SW version via the web interface [See sec-
tion 9.3} Page 50].
The red "Fault" LED is flashing slowly.
Note: The procedure has not been completed successfully or a time limit
has elapsed.
Important: If the USB stick is removed during the initialization phase, a
device fault is triggered. Inserting the USB stick initiates a device restart.
No fault present.
Page 49