Kaco blueplanet 92.0 TL3 US Manual page 46

9 | Configuration and operation
Step: Power limitation
↻ The country and grid type have been selected.
. NOTE: The permanent power limitation of the maximum active and
apparent power for generation plants is agreed between the grid op-
erator and the plant operator.
1. Activate power limitation if required
2. Set maximum apparent power and maximum active power.
3. Activate password protection if required.
4. Confirm the action field.
ð The Forward button jumps to the next installation step.
Step: Localization
↻ The network parameters have been set up.
1. Set the date, time and time zone or arrange for synchronization with
the client.
2. NOTE: An NTP server needs to be activated for synchronization purposes
3. Select temperature unit from the dropdown menu.
4. Confirm the action field.
ð Pressing the Next button will take you to the next installation step.
Step: Cloud & portal configuration
↻ Localization has been carried out.
1. If available, activate Web portal and select Portal from the dropdown
menu.
2. Configure the portal.
3. Confirm the action field.
ð Pressing the Next button will take you to the next installation step.
Step: ModBus
↻ Portal configuration completed.
. NOTE: The device supports MODBUS/TCP and conventional SUNSPEC
models. If there are concerns over security, write access can be deac-
tivated.
1. Specify the Modbus port and determine Read/write access.
2. Confirm the action field.
ð Pressing the Next button will take you to the next installation step.
12
It is preferable to install this on a plant component. It is also possible to select an NTP server localized on the
internet provided the device has direct access to the internet.
Page 46 KACO blueplanet 92.0 TL3 US KACO blueplanet 110 TL3 US KACO blueplanet 125 TL3 US
Manual
Fig. 53: Menu item: [See sec-
tion 9.4.2} Page 53]
12
Fig. 54: Menu item: [See sec-
tion 9.4.2} Page 53]
Fig. 55: Menu item: [See sec-
tion 9.4.2} Page 53]
Fig. 56: Menu item: [See sec-
tion 9.4.2} Page 53]