Signal Elements - Kaco blueplanet 92.0 TL3 US Manual

Manual
Step: String combiner
↻ Modbus has been specified.
1. If available, activate string combiner monitoring.
. NOTE: When a blue´Log device is used, the only 3rd party string com-
biner device currently available, which can also be addressed in this
manner via the Segment Controller, comes from "Kernel Sistemi".
2. Set other parameters.
3. Confirm the action field.
ð Pressing the Next button will take you to the next installation step.
Step: Optional parameters
↻ String collector monitoring has been set up.
. NOTE: Using the plant ID, the device followed by its firmware version
can be detected automatically in the Cloud/portal and assigned to
the relevant plant.
1. Enter the device name used to reach the device in the network.
. NOTE: The coordinates identify the device installation location.
2. Confirm the action field.
ð Pressing the Next button will take you to the next installation step.
Step: Finalisation
↻ Optional parameters have been set.
1. Generate installation report (includes listing of all relevant parameters for ac-
ceptance purposes)
2. Specify a name for the device installation report.
3. Confirm the action field.
NOTE: All settings can also be transferred to another unit of the same se-
ries (provided that no individual parameters are required, e.g. static IP
address).
1. Optional: Export current unit settings to the client.
2. Device configuration completed successfully. Please click "Finalise" to put the
device into operation.
ð The initial installation is now complete. Specify access for device(s).
9.2

Signal elements

The 3 LEDs on the device show the different operating states. The LEDs can display the following states:
LED illuminated
Operating status LED status
Start
KACO blueplanet 92.0 TL3 US KACO blueplanet 110 TL3 US KACO blueplanet 125 TL3 US
Configuration and operation | 9
LED flashing
Description
The green "Operating" LED is illuminated when AC and DC voltage is
present.
Fig. 57: Menu item: [See sec-
tion 9.4.2} Page 53]
Fig. 58: Menu item: Only on the in-
stallation wizard!
Fig. 59: Menu item: Only on the in-
stallation wizard!
LED not illuminated
Page 47