Kaco blueplanet 92.0 TL3 US Manual page 85

Manual
Country- Men Display/
spec. Set- u Setting
tings level
Settling time
1,000 – 120,000
[ms] /
10
Number of nodes
2 – 10
1. Stützstelle ... 10.
Stützstelle
0V - Max. voltage in
continuous operation
1 – 0,3 /
0.001
Over-excited | un-
der-excited
Q(U) 10 nodes
Power gradient in-
creasing & power gra-
dient decreasing
1 – 65,534 [% S
min] /
min] /
Settling time
1,000 – 120,000
[ms] /
10
Number of nodes
2 – 10
1. Stützstelle ... 10.
Stützstelle
0V - Max. voltage in
continuous operation
1 – 0,3 /
0.001
Over-excited | un-
der-excited
Q(U) 10 nodes
Lock-in power
0 – 100 [% S
20 [% S
lim
Lock-out power
0 – 100 [% S
[% S ] /
n
Lock-In time
0 – 60,000 [ms] /
30,000 [ms] /
[ms]
KACO blueplanet 92.0 TL3 US KACO blueplanet 110 TL3 US KACO blueplanet 125 TL3 US
Action in this menu/meaning
Determines the dynamic behaviour in the event of a change in the cos ϕ
set value. With a change of the active power or the lock-in and lock out
voltage, the cos ϕ is changed according to a PT-1 characteristic curve
5,000 [ms]
with a settling time of 5 Tau.
Specify the number of nodes for the cos ϕ/(p/pn) characteristic curve
Power of the node as a percentage of the maximum power.
For the 1st node, the power must be 0%; for the last node, the power
must be 100%. The power values of the nodes must increase continu-
ously.
Note: Storage inverters only for feed-in operation
1 / Reactive power of the node as a percentage of the maximum power
Reactive power mode Under-excited relates to inductive load, over-ex-
cited relates to capacitive load.
Maximum change in the reactive power %S
change to over-excited mode
NOTE: The gradient is overlaid with the settling time.
/
lim
65,534 [% S /
lim
1
Determines the dynamic behaviour in the event of a change in the Q
target value. With a change of the reactive power or the lock-in and lock
out voltage, the Q is changed according to a PT-1 characteristic curve
1,000 [ms]
with a settling time of 5 Tau.
Specify the number of nodes for the Q(U) characteristic curve.
Power of the node as a percentage of the maximum power.
For the 1st node, the power must be 0%; for the last node, the power
must be 100%. The power values of the nodes must increase continu-
ously.
Note: Storage inverters only for feed-in operation
1 / Reactive power of the node as a percentage of the maximum power
Reactive power mode Under-excited relates to inductive load, over-ex-
cited relates to capacitive load.
Power threshold, function is activated if limit value is exceeded.
] /
lim
] / 1
Power threshold, function is activated if limit value is undershot.
] / 5
n
1
Length of time that the active power must remain below the lock-in
power level before control is deactivated.
1,000
Specifications | 10
/min in the event of a
lim
Page 85