Kaco blueplanet 92.0 TL3 US Manual page 70

9 | Configuration and operation
Country- Level Display/
spec. Set- settings
tings
Gradient in the event
1 2 3 4 4
of overfrequency -
feed-in
0 – 200 (%/Hz)
(%/Hz)
Gradient in the event
of underfrequency -
feed-in
0 – 200 (%/Hz)
(%/Hz)
Activation threshold at
1 2 3 4 4
underfrequency
40 – 60 [Hz] /
[Hz]
Activation threshold at
overfrequency
50 – 70 [Hz]
[Hz]
Gradient on falling fre-
1 2 3 4 4
quency
0 – 200 [% Pref/
Hz] / 40 [% Pref/
Hz] / 1
Not at IL, IT P(f) Deaktivierungszeit
1 2 3 4 4
0 – 6000000 [ms] /
0 [ms] /
P(f) deactivation gradi-
1 2 3 4 4
ent
0 – 65,534 [% Smax /
min] /
P(f) intentional delay
1 2 3 4 4
0 – 5,000 [ms] /
[ms] 1
P(f) minimum deactiva-
1 2 3 4 4
tion frequency
45 – 61.5 [Hz] /
0.01 &
P(f) maximum deacti-
vation frequency
45 – 70 [Hz] /
Output gradient limita-
1 2 4 4
3
tion increase & Output
gradient limitation de-
crease
1 – 65534 [% Slim /
min] /
Slim / min] /
Page 70
Action in this menu/meaning
1. Determine the gradient for feed-in in the event of overfrequency.
2. Determine the gradient for feed-in in the event of underfrequency.
40
40
1. Frequency thresholds for activating the power limitation with un-
dervoltage.
0.01
2. Frequency thresholds for activating the power limitation with over-
voltage.
0.01
F Specify gradient in the case of a decreasing frequency as a %
thousand) / minute (if mode "1" or mode "2" is active).
F Specify time for power reduction (if mode 1 is active).
1000 [ms]
F Specify deactivation gradient.
10 / 1
F Set delay of the power limitation.
0
F Specify the minimum deactivation frequency in Hz.
NOTE: Only evaluated in mode 1.
The function is disabled if the frequency returns to the range between
the minimum and maximum deactivation threshold and remains within
this range for the duration of the deactivation time.
0.01
F Specify the increasing and decreasing output gradient.
65534 [%
1
KACO blueplanet 92.0 TL3 US KACO blueplanet 110 TL3 US KACO blueplanet 125 TL3 US
Manual
(per
0