Kaco blueplanet 92.0 TL3 US Manual page 71

Manual
Country- Level Display/
spec. Set- settings
tings
P(f) settling time
1 2 3 4 4
200 – 2,000 [ms] /
200 [ms] /
Password protection
Status
Voltage-dependent
2
1 3 4 4
Operation mode
3
1 2 4 4
OFF | ON
Reference power
1 2 3 4 4
Actual power |
Nominal power
Evaluated voltage
1 2 3 4 4
Maximum phase
voltage | Positive se-
quence voltage
Hysteresis mode
1 2 3 4 4
Off | On
Deactivation gradient
4 4
1 2 3
0 – 65,534 [% /
min] /
min] /
Deactivation time
4
1 2 3 4
0 – 60000000 [ms] /
0 [ms] /
Output gradient limita-
1 2 3 4 4
tion increase & Output
gradient limitation de-
crease
1 – 65534 [% Slim /
min] /
Slim / min] /
Settling time
4
1 2 3 4
500 – 120000 [ms] /
2000 [ms] /
[ms]
Active curve
1 2 3 4 4
1 - 5
KACO blueplanet 92.0 TL3 US KACO blueplanet 110 TL3 US KACO blueplanet 125 TL3 US
Action in this menu/meaning
1. Set the P(f) settling time mode.
2. Activate optional password protection.
1 [ms]
3. Confirm the action field.
NOTE: Activate voltage-dependent power reduction in the
P(U) menu.
F Regelverfahren aktivieren.
Off: Deactivates dynamic grid support using dynamic reactive current.
Dynamic grid support remains active on account of immunity to inter-
ference.
F Select the power-dependent control method.
F Select the voltage to be rated.
Defines which voltage in a three-phase system is to be evaluated.
NOTE: Hysteresis mode affects the shutdown response of
P(U).
F Activate the mode.
F Set the gradients for the power limitation.
100 [% /
1
F Specify the time for voltage reduction.
1000 [ms]
F Specify the increasing and decreasing output gradient.
65534 [%
1
F Specify the settling time.
10
F Select the active curve.
NOTE: Up to 5 characteristic curves can be configured inde-
pendently and one of them can be activated for regulation
each time.
Configuration and operation | 9
Page 71