Kaco blueplanet 92.0 TL3 US Manual page 73

Manual
Country- Level Display/
spec. Set- settings
tings
SPD monitoring
2
4
1 3 4
SPD monitoring AC
1 2 3 4 4
SPD monitoring DC
Status
Password protection
Status
Q on Demand
2
1 3 4 4
Night Shutdown
1 2 3 4 4
Check to activate
Relay
2
1 3 4 4
Relay
1 2 3 4 4
Positive logic | Neg-
ative logic
inactive | active
String combiner logging
4 4
1 2 3
interval
10 [sec] 1, 5, 10, 15,
30, 60 [min]
Logging Management
1
2 3 4 4
Settings
1 2 3 4 4
User logging interval
1 2 3 4 4
1 | 5 | 10 | 15 [min-
utes] /
Service logging interval
1 2 3 4 4
1 – 120 [sec] /
[sec] /
PCU logging interval
4
1 2 3 4
1 – 120 [sec] /
[sec] /
KACO blueplanet 92.0 TL3 US KACO blueplanet 110 TL3 US KACO blueplanet 125 TL3 US
Action in this menu/meaning
NOTE: Opportunity to check the overvoltage protection with
appropriate status messages
1. Activate overvoltage protection.
2. Activate optional password protection.
3. Confirm the action field.
NOTE: Activate function only with explicit permission of the
network operator. Additional conditions:
- No PID solution connected to the unit.
- Constant voltage regulator in the unit is deactivated. See table : Con-
figuration via web user interface [} Page 54]
1. Q on Demand is activated by deactivating the night shutdown.
2. Transfer selection to memory.
3. Observe the information window and activate the function with the
"OK" button if necessary.
NOTE: The currently specified reactive power settings are
used. Power-dependent functions are not used.
NOTE: If AC is disconnected during the night, the function is
only available the next day.
NOTE: Opportunity to configure the fault signal relay [ERR].
1. Select the type of logic.
2. Select the form of activity.
3. Confirm the action field.
F Specify the time period between 2 log data recordings.
NOTE: Input screens for log and service data and default set-
tings.
Specify the interval for data capture and base meters.
F Specify the time period between 2 log data recordings.
NOTE: Setting and duration until memory is overwritten: 1min
5
– 5 days; 5min – 4,5 years; 10 min – 9 years; 15 min – 14 years.
F Specify the time period between 2 log data recordings.
10
NOTE: Setting and duration until memory is overwritten: 1 sec
1
– 9 days; 10 sec – 92,5 days; 120 sec - 1110 days
F Specify the time period between 2 log data recordings.
10
NOTE: Setting and duration until memory is overwritten: 1 sec
1
– 9 days; 10 sec – 92,5 days; 120 sec - 1110 days
Configuration and operation | 9
Page 73