Kaco blueplanet 92.0 TL3 US Manual page 9

Manual
WARNING
Hazard when using unsuitable fixing materials!
If unsuitable fixing materials are used, the device could fall and persons in front of the device may be seriously
injured.
1. Use only fixing materials that are suitable for the mounting base. The fastening materials supplied are only
to be used for masonry and concrete.
2. Only install the device in an upright hanging position.
WARNING
Risk of burns from hot housing components
Housing components could heat up during operation.
1. Only touch the housing cover of the device during operation.
WARNING
Danger due to live interface cables.
Damage to the integrated RSS transmitters when connecting to further devices.
1. Make sure the AC cable is disconnected from power.
2. If the system has multiple RSS transmitters, the most effective method for the reduction of interference
frequencies is to synchronize the signal between the transmitters in a leader-follower process. This mea-
sure is not required in case of only one RSS transmitter.
3. Comply with the following wiring diagram.
WARNING
Risk of burning due to hot surface
Heat sinks become very hot during operation.
1. Never touch the heat sinks after starting up the device.
2. Wait until a cooling time of at least 10 minutes has elapsed before starting the cleaning process.
CAUTION
Hazard due to impact; risk of breakage to the device!
1. Pack the device securely for transport.
2. Transport the device using the intended carrying handles of the packaging box.
3. Do not expose the device to any shocks.
KACO blueplanet 92.0 TL3 US KACO blueplanet 110 TL3 US KACO blueplanet 125 TL3 US
IMPORTANT SAFETY INSTRUCTIONS | 2
Page 9