Control Elements - Kaco blueplanet 87.0 TL3 M1 WM OD IIF0 Manual

9 | Configuration and operation
Step: Optional parameters
↻ String collector monitoring has been set up.
. NOTE: Using the plant ID, the device followed by its firmware version
can be detected automatically in the Cloud/portal and assigned to
the relevant plant.
1. Enter the device name used to reach the device in the network.
. NOTE: The coordinates identify the device installation location.
2. Confirm the action field.
ð Pressing the Next button will take you to the next installation step.
Step: Finalizing the installation
↻ Optional parameters have been set.
1. Device configuration completed successfully. Please click "Finalize" to put the
device into operation.
2. Specify a name for the device installation report.
3. Confirm the action field.
ð The initial installation is now complete. Specify access for device(s).
9.2

Control elements

The 3 LEDs on the device show the different operating states. The LEDs can display the following states:
LED illuminated
Operating status
Start
Feed-in start
Feed-in mode with re-
duced power
Non-grid feed mode
Page 44
LED flashing
LED Symbol Description
The green "Operating" LED is illuminated when AC and DC volt-
age is present.
If the LED is flashing, internal communication between the compo-
nents is being established. When the LED stops flashing, the device
is ready to feed in.
If the LED continues to flash for a long time, there is an internal
communication error.
The green "Operating" LED is illuminated.
The green "Feed-in" LED is illuminated after the country-specific
waiting period*.
The device feeds into the grid.
You can hear the circuit-breaker / interface switch switch on.
The green "Operating" LED is lit.
The green LED "Feed" is flashing because one of the modes: inter-
nal power reduction, external power reduction, external reactive
power request or standalone mode is active.
The device feeds into the grid.
You can hear the circuit-breaker / interface switch switch on.
The green "Operating" LED is illuminated.
Manual
Fig. 55: Menu item: Only on the instal-
lation wizard!
Fig. 56: Menu item: Only on the instal-
lation wizard!
LED not illuminated
KACO blueplanet 110 TL3 KACO blueplanet 125 TL3 US