7. Install the air baffle.
8. Install the access panel.
9. Install the server into the rack.
Processor and heatsink options
Installing a processor
Hewlett Packard Enterprise recommends identifying the processor and socket components before performing this
procedure.
Prerequisites
Before you perform this procedure, make sure that you have the following items available:
•
The components included with the hardware option kit
•
T-20 Torx screwdriver
•
1.0 gm (0.5 ml) or two 0.5 gm (0.25 ml) of thermal grease
•
Alcohol wipe
Procedure
1.
Observe the following alerts:
CAUTION: To avoid damage to the processor or system board, only authorized personnel should attempt to
replace or install the processor in this server.
CAUTION: To prevent possible server malfunction and damage to the equipment, multiprocessor
configurations must contain processors with the same part number.
Hardware options installation
94