Neilson Source Id Mode; Positioning The Overall Character Display; Making Fine Adjustments To The Character Generator Raster Position; Special Vitc Indicators - evertz 8950-SID Instruction Manual

Digital source id decoder
Table of Contents

Advertisement

OPERATION
Model 8950-SID Digital Source ID Decoder Manual
For example, to move only the Time window down, leaving the source
ID/status window in the same place, press CHAR GEN WINDOW and
press the $ key. Press the CHAR GEN WINDOW key three times to
return to the normal display mode.
3.5.2. Selecting and Positioning the Individual Character Inserter
Windows

- Neilson Source ID Mode

Press CHAR GEN WINDOW to enable the window select mode. Both
windows will appear on the character screen with the window for the time
highlighted. Use the arrow keys (#, $, !, ") to position the Source ID
window on the screen.
window on or off. Press the CHAR GEN WINDOW key to highlight the
multi-line summary window. Use the CHAR GEN ON/OFF key to turn it on
or off and the vertical arrow keys (#, $) to move it to the desired location.
There is only vertical positioning of this display. Press the CHAR GEN
WINDOW key to return to normal display mode.

3.5.3. Positioning the Overall Character Display

In the normal VITC display mode, when none of the windows are
highlighted, the arrow keys (#, $, !, ") move all the displayed windows
by the same relative amount. For example, to move the time and source
ID/status windows both down by one line press the $ key.
3.5.4. Making Fine Adjustments To The Character Generator Raster
Position
In the normal VITC display mode, when none of the windows are
highlighted, holding down the shift key while pressing the arrow keys (#,
$, !, ") move the complete character raster in fine increments on the
picture.
The range of fine adjustment is limited when the character
windows are positioned near the edges of the screen.

3.5.5. Special VITC Indicators

In VITC Source ID mode the following special indicators are used between
the seconds and frames digits of the time window in the character inserter
to identify non drop frame and drop frame code (NTSC only).
Non Drop Frame
Drop Frame (NTSC) Period (.)
Revision 1.0
Use the CHAR GEN ON/OFF key to turn the
Colon (:)
Page 3-10

Advertisement

Table of Contents
loading

Table of Contents