Character Generator Functions; Selecting And Positioning The Individual Character Inserter Windows; Positioning The Overall Character Display - evertz 5010 SIE Instruction Manual

3.8.

CHARACTER GENERATOR FUNCTIONS

%
OPERATING INSTRUCTIONS
exit the Source ID programming mode without changing the
programmed message press the SETUP key.
Two separately positionable character windows displaying Time or Source
ID/Status (user bits) are available. Although the Source ID and Status
windows move together, they can be independently turned on and off. The
four arrow keys (#, $, !, ") control the position of all the windows. The
CHAR GEN ON/OFF key selects whether the video character generator
(VCG) keyer is on or off. The use of these keys in combination with the
CHAR GEN WINDOW key selects which windows are displayed and their
position on the screen. The CHAR SIZE item of the Setup menu is used to
select character size.
3.8.1. Selecting and Positioning the Individual Character Inserter
Windows
Press CHAR GEN WINDOW to enable the window select mode. All the
character windows will appear on the screen with the window for the Time
highlighted. Use the arrow keys (#, $, !, ") to position the Time window
on the screen. Use the CHAR GEN ON/OFF key to turn the Time window
on or off. Press the CHAR GEN WINDOW key to highlight the Source ID
window. Use the CHAR GEN ON/OFF key to turn the Source ID window
on or off and the arrow keys to move it to the desired location. Press the
CHAR GEN WINDOW key to highlight the Status window. Use the CHAR
GEN ON/OFF key to turn the Status window on or off and the arrow keys to
move it to the desired location. Press the CHAR GEN WINDOW key to
return to normal display mode.
For example, to move only the Time window down, leaving the Source ID/
Status window in the same place, press CHAR GEN WINDOW and press
the $ key. Press the CHAR GEN WINDOW key three times to return to
the normal display mode.
Note that the Source ID and Status windows always move together.

3.8.2. Positioning the Overall Character Display

In the normal VCG display mode, when none of the windows are
highlighted, the arrow keys (#, $, !, ") move all the displayed windows
by the same relative amount. For example, to move the time and source
ID/status windows both down by one line, press the $ key.
Model 5010-SIE Source ID Encoder Manual
Page 3-14